Electro-Mechanical and Mechatronics Technologists and Technicians Salary
Architecture and Engineering Occupations · 16K employed in the U.S.
Median annual
$73,900
Median hourly
$36
Average annual
$76,420
Typical range
$47,840–$109,890
Pay distribution
10th to 90th percentile, with the median marked.
What this role pays
The median annual salary for Electro-Mechanical and Mechatronics Technologists and Technicians is $73,900 as of May 2025, based on the U.S. Bureau of Labor Statistics Occupational Employment and Wage Statistics (OEWS) survey. That works out to about $36 an hour at a full-time schedule.
Operate, test, maintain, or adjust unmanned, automated, servomechanical, or electromechanical equipment. May operate unmanned submarines, aircraft, or other equipment to observe or record visual information at sites such as oil rigs, crop fields, buildings, or for similar infrastructure, deep ocean exploration, or hazardous waste removal.
Most earn between $47,840 and $109,890 a year. There are roughly 16K people employed as electro-mechanical and mechatronics technologists and technicians in the United States. Use the state and metro pages below to see how pay changes by location, and the calculator to convert any hourly or annual figure.
Salary calculator
Convert your pay and see where it lands for Electro-Mechanical and Mechatronics Technologists and Technicians.
- Hourly
- $35.53
- Daily
- $284
- Weekly
- $1,421
- Bi-weekly
- $2,842
- Monthly
- $6,158
- Annual
- $73,900
$73,900 a year is around the 50th percentile for Electro-Mechanical and Mechatronics Technologists and Technicianss. The median is $73,900.
Highest-paying states
Median annual wage by state.
- 1New Mexico$119,320
- 2North Dakota$82,820
- 3Maine$82,510
- 4Nevada$82,010
- 5Connecticut$81,860
- 6California$81,550
- 7Washington$81,220
- 8Arizona$80,930
- 9Alaska$80,290
- 10Illinois$79,400
- 11Montana$77,340
- 12Wisconsin$76,290
Top-paying metro areas
Median annual wage by metro area.
- 1San Francisco-Oakland-Fremont, CA$109,990
- 2Toledo, OH$109,890
- 3Bridgeport-Stamford-Danbury, CT$103,780
- 4Seattle-Tacoma-Bellevue, WA$100,090
- 5Hartford-West Hartford-East Hartford, CT$97,200
- 6Los Angeles-Long Beach-Anaheim, CA$92,360
- 7Portland-South Portland, ME$83,250
- 8Reno, NV$82,790
- 9Providence-Warwick, RI-MA$81,390
- 10Durham-Chapel Hill, NC$81,190
- 11Phoenix-Mesa-Chandler, AZ$80,930
- 12Miami-Fort Lauderdale-West Palm Beach, FL$80,640
Related job titles
Employers advertise Electro-Mechanical and Mechatronics Technologists and Technicians roles under these titles.
- Automation Control Integrator
- Automation Control Technician
- Automation Controls Expert
- Automation Controls Specialist
- Automation Engineering Technician
- Automation Technologist
- Automation Test Specialist
- Electrical and Instrumentation Specialist
- Electro-Mechanic
- Electromechanical Assembler (EM Assembler)
- Electromechanical Specialist (EM Specialist)
- Electromechanical Technician (EM Technician)
- Electromechanical Technologist (EM Technologist)
- Electronic Industrial Control Mechanic
- Hardware Rework Specialist
- Instrument and Automation Technician
Related occupations
- Aerospace Engineering and Operations Technologists and Technicians$82,890
- Calibration Technologists and Technicians$67,820
- Electrical and Electronic Engineering Technologists and Technicians$78,190
- Avionics Technicians$82,280
- Electro-Mechanical and Mechatronics Technologists and Technicians$73,900
- Mechanical Engineering Technologists and Technicians$74,510
- Electrical and Electronics Repairers, Commercial and Industrial Equipment$74,090
- Aircraft Structure, Surfaces, Rigging, and Systems Assemblers$65,380
What a Electro-Mechanical and Mechatronics Technologists and Technicians does
- Read blueprints, schematics, diagrams, or technical orders to determine methods and sequences of assembly.
- Install electrical or electronic parts and hardware in housings or assemblies, using soldering equipment and hand tools.
- Verify part dimensions or clearances to ensure conformance to specifications, using precision measuring instruments.
- Align, fit, or assemble component parts, using hand or power tools, fixtures, templates, or microscopes.
- Test performance of electromechanical assemblies, using test instruments such as oscilloscopes, electronic voltmeters, or bridges.
- Inspect parts for surface defects.
- Install or program computer hardware or machine or instrumentation software in microprocessor-based systems.
- Modify, maintain, or repair electrical, electronic, or mechanical components, equipment, or systems to ensure proper functioning.
Frequently asked questions
- How much does a Electro-Mechanical and Mechatronics Technologists and Technicians make?
- The median annual wage for Electro-Mechanical and Mechatronics Technologists and Technicians is $73,900 ($36 per hour). Pay ranges from about $47,840 at the 10th percentile to $109,890 at the 90th percentile.
- What is the average salary for a Electro-Mechanical and Mechatronics Technologists and Technicians?
- The average (mean) annual salary is $76,420, which is higher than the median because a small number of high earners pull the average up.
- Which state pays Electro-Mechanical and Mechatronics Technologists and Technicianss the most?
- New Mexico has the highest median annual wage for this occupation at $119,320.
- Is Electro-Mechanical and Mechatronics Technologists and Technicians a growing occupation?
- BLS employment data for May 2025 counts about 16K people in this occupation. Projected growth is published separately in the BLS Employment Projections program.
- What does a Electro-Mechanical and Mechatronics Technologists and Technicians do?
- Read blueprints, schematics, diagrams, or technical orders to determine methods and sequences of assembly.; Install electrical or electronic parts and hardware in housings or assemblies, using soldering equipment and hand tools.; Verify part dimensions or clearances to ensure conformance to specifications, using precision measuring instruments..